| Drive assembly 24V |
|
Drive assemblies 230V |
|
The ORBIT drive assembly fits into any gatepost with internal dimensions of 148 x 148mm minimum. |
|
|
|
The 230V drive assemblies fit into any gatepost with internal dimensions of 350 x 250 x 1,000mm minimum. |
|
|
The drive unit incl. motor and controller is mounted onto a console. This complete drive assembly can be installed into the gatepost using only 4 screws. |
|
|
|
Fasten the complete drive unit with motor and controller on the foundation. The gatepost is then placed over it and secured with screws. |
|
|
Immediate stop and reversing for a short distance on contact with an obstacle. |
|
|
|
With all 230 slide gate openers an immediate stop via electronic brake and reversing for a short distance takes place when a safety device is activated. |
|
|
Plastic rack module 5, in an anodized aluminium-profile, height adjustable.
Module 4, made of plastic, height adjustable, available upon request. |
|
|
|
ELKA supplies rack module 4, galvanized steel, height adjustable, to be screwed on the gate or module 6, galvanized steel, to be welded on the gate. |
|
|
The toothed wheels made of plastic are height adjustable up to 30mm. |
|
|
|
Drive assemblies 230V are height adjustable up to 30mm. |
|
|
The optionally available pre-wired terminal row includes a socket for a 1-channel loop detector. |
|
|
|
The optionally available pre-wired terminal row includes a socket for a 1-channel loop detector. |
|
|
Soft-start and soft-stop, stageless. |
|
|
|
| Drive assembly |
Power supply / motor voltage |
Max. weight of gate |
Max. length of gate |
Duty cycle |
Velocity |
Controller |
Limit switches |
| ORBIT |
|
|
|
50% |
0.17m/s |
MO 46 |
none |
| EST 604K |
|
|
|
75% |
0.18m/s |
MO 44-2 |
2 magnetic |
| EST 1204K |
|
|
|
75% |
0.18m/s |
MO 44-2 |
2 magnetic |
| EST 2004K |
|
|
|
75% |
0.18m/s |
MO 44-2 |
2 magnetic |
|
